3D GO
April 25, 2026
Description
Print on its back. To print multicolor, paint by elevation in your slicer. 0.2 mm nozzle will look nicer, but they'll print fine with 0.4 mm. Maximum 0.2 mm layer height.
License:
Creative Commons — Attribution
Proteus Key Holder
ProteanMan
33,422
Franco Keychain
rtm
5,366
67 Hype Chain
Slayer3D
860
BUSINESS CARD CASES
YSoft_be3D
20,512
Zipper Pull - Ghost (Pac Man)
TWB
2,255
Custom Name Tag Generator
Tinker Link
430
Full Scale Stormtrooper Helmet (wearable)
Geoffro
20,031
Belt 2.2
Printschnitzel.at
1,570
HB
