Super Strong coat , towel and key hook

Made a hook with a hole to hang some stuff around the house.

it is strong enough to hang a winter coat, i believe it can bear a lot more load but didn't test the max strength.

Print settings 

• layer height: 0.12 mm
• Number of walls: 4
• infill: 30% ( more infill equals more strength)
• Material: I used PLA. PETG, ABS, and other materials are possible.
• supports: no

Installing:

You will need for this build

• 1 flathead screw 35mm long. 3,4 or 5 mm thick.
• A 30mm long wall plug that suits your wall needs (drywall, wood etc). And diameter screw.
• A drill bit with the same diameter as the wall plug.
• a drill.
• Hammer

Choose where you want the hook. Mark a point where you want it. Pre dill the hole a bit if the wall is smooth. Drill the hole 35 mm deep.  Hit the wall plug in with a hammer. Screw the hook in the wall with the screw. 

Coming updates

will add a plaster wall plug in the future to print yourself.