Shadowhop – 3D Printed Bookmark

Shadowhop – 3D Printed Bookmark (HueForge Multi-Color Design) 🐇🌑

⚠ The model preview may appear black, but the full colors will appear correctly after slicing with filament swaps!

A little spooky, a little sweet — Shadowhop is a twisted take on the Easter bunny, nestled in a garden of eerie blossoms and glowing eggs. With bold red eyes and a glowing silhouette, this HueForge bookmark is perfect for lovers of the strange, cute, and slightly creepy.

Great for seasonal prints, alternative Easter gifts, or anyone who enjoys their holidays with a hint of mystery.

🎨 Filaments & Color Swap Instructions:

This print uses 6 unique filaments to create smooth shading and vivid color pops:

Start with Black

At layer #8 (0.72mm), swap to Blue Gray

At layer #13 (1.12mm), swap to Red

At layer #16 (1.36mm), swap to Purple

At layer #18 (1.52mm), swap to Grey

At layer #21 (1.76mm), swap to White (for the rest)

🛠 Filaments Used:

✔ PLA PolyLite Black – Transmission Distance: 0.3
✔ PLA BambuLab Basic Blue Gray – Transmission Distance: 3
✔ PLA BambuLab Basic Red – Transmission Distance: 5
✔ PLA Overture Matte Purple – Transmission Distance: 0.7
✔ PLA PolyLite Grey – Transmission Distance: 1
✔ PLA PolyLite White – Transmission Distance: 5

✅ Print Settings:

Layer Height: 0.08mm

Base Layer Height: 0.16mm

Infill: 100%

Size: 57.84 x 200 mm

Actual Depth: 2.2 mm

📥 Download “Shadowhop” to bring a little gothic spring energy to your next bookmark project – perfect for horror fans, collectors, and holiday rebels.

🔗 Want to sell prints?

Commercial use is available through my MakerWorld profile – all past and future designs included with membership.
📍 https://makerworld.com/en/@Lilith3dPrint

🙌 Thanks for your support, and happy printing!