Cable Raceway - adjustable size, comb, screw holes

A cable raceway that can be easily adjusted using Fusion 360 Parameters.

Parameters available:

• length
• width
• height
• screw hole diameter
• “screws every x” - create a screw hole every ‘x’ comb openings
• comb width - main comb opening width
• comb gap - top gap at comb opening

Attached STLs

Listed dimensions are length x width x height in mm. All have 10mm comb opening and 3mm screw holes.

• 150x45x30, holes every 2, 4mm top gap
• 300x45x30, 3 total holes, 4mm top gap
• 400x45x30, 3 total holes, 6mm top gap
  • This is what I used in the picture, the top gap is wider to clear my CAN cable

Bonus

Zero G DIN rail mounts with logo (source here)! Uses one heatset per mount. 

• one specific for 45mm wide versions with a little lip on it
• one general mount without a lip for any width