Brown Violin 3D Printed Bookmark – HueForge Multi-Color Design

Brown Violin 3D Printed Bookmark – HueForge Multi-Color Design 🎶

⚠ The model preview may look black, but all colors will appear correctly after slicing with swaps!

Celebrate the harmony of music and motion with this elegant HueForge-optimized bookmark, featuring a violin wrapped in swirling artistic lines. Carefully layered tones bring this design to life with richness and depth—perfect for musicians, readers, and creatives.

🎨 Filaments & Color Swap Instructions:

Uses 5 unique filaments for smooth transitions and high contrast:

• Start with Black
• At layer #9 (0.8mm), swap to Blue Gray
• At layer #13 (1.12mm), swap to Brown
• At layer #17 (1.44mm), swap to Orange
• At layer #20 (1.68mm), swap to White (for the rest)

🛠 Filaments Used:

✔ PLA PolyLite Black – Transmission Distance: 5
✔ PLA BambuLab Basic Blue Gray – Transmission Distance: 5
✔ PLA PolyLite Brown – Transmission Distance: 5
✔ PLA BambuLab Basic Orange – Transmission Distance: 5
✔ PLA BambuLab Basic White – Transmission Distance: 5

✅ Print Settings:

• Layer Height: 0.08mm
• Base Layer Height: 0.16mm
• Infill: 100%
• Size: 57.84 x 200 mm
• Actual Depth: 2.1 mm

🔗 Want to sell prints?

Commercial use is available through my MakerWorld profile – all past and future designs included with membership.
📍 https://makerworld.com/en/@Lilith3dPrint

🙌 Thanks for your support, and happy printing!