BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones

BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet

The strap eyelets on the title picture are printed in PETG Galaxy Silver 

Caution: The tensile strength of the eyelets depends on the filament used. It is recommended to use it as belt guides only.

Mounting instructions

Remove the original strap eyelets by loosening the two screws per eyelet with a Torx 20 bit. Mount the 3d printed strap eyelets using the original screws, tightening torque 6Nm

Printing instructions

• These are recommendations based on testprint results (Prusa Slicer)
• PETG or ASA (tested only with parts printed with PETG filament)
• 0.4 nozzle
• 0.2mm Structural
• support on build plate only
• Paint-on supports (L) Automatic painting
• Support material organic
• infill 20% 
• fill pattern 3D Honeycomb