Phone Dolly

INTRODUCTION:

This phone dolly is meant for use on a desk or flat surface to create smooth rolling shots. There are currently mounts for a phone or GoPro.

PRINTING INSTRUCTIONS

• Print Material: PLA (and TPU for “TPU - Wheel Treads”)
• Layer Height: 0.15mm
• Infill: 25%+ (Print the “Bolt”s at 100% for best results)
• Support required for “Base Bottom”

MATERIALS:

There is some hardware (M3 screws) associated with this build for mounting the wheels.

• M3 Screw Kit: This is the M3 screw kit I used for this dolly, (and most of my 3D modeling projects.)

(As an Amazon Associate I earn from qualifying purchases). If you would like to support my modeling this is a great way to do it!

A PRECAUTION:

Depending on how smoothly your TPU wheels print there will be varying vibrations and shakes in the design. In the future I would like to experiment with more wheels to decrease vibrations even more. Regardless, use a stabilization software - most phones have them already built in - for the best results.

If you do print this design please let me know how it works for you, and what upgrades you would like to see!