'Poop' toilet roll shelf

The files for the letters P and O are provided.
Print 2x 'P' and as many O's as you want.
I've included 2 versions of the 'P', one has a squared descender and the other has a rounded descender so you can choose which style you prefer.

I printed the 'O's first with a 7% Gyroid infill, but when slicing the 'P's this seemed like too much material, so I lowered that to 3% and it printed fine with 3 walls and 4 top/bottom layers. If I were to do it again, I'd use 3% Gyroid on the 'O's as well.

For those interested in material use per letter (assuming 3% infill etc mentioned above):
Rounded 'P' - 97g - 32.63m
Square 'P' - 100g - 33.51m
'O' - 64g - 21.31m

The dimensions are:
'P' - 116 x 110 x 110mm
'O' - 116 x 58 x 110mm

Wall mounting is achieved by 2 screws for each letter. The screw holes are countersunk and should accommodate most screws.

-Update-
For those with a print bed large enough, I've created a version that is one model rather than the individual letters. You'll need space for 455x110x110mm. Again, there's a rounded and square version.

12/05/2025 - There are now solid backed versions of the individual letters and the whole word for people that wanted to mount to the wall with double-sided tape instead of screws.

The design of this project is my own, however the idea was seen elsewhere but I couldn't find a design I was happy with, or able to accommodate on my printer.