The Traitors Shield

My take on the shield as shown in the BBC show “The Traitors”. Has a hole at the top for threading some string to. The details on the inside of the shield prints separately, requiring it to be superglued into the shield.

The holes are for half-sphere pearls to be inserted / superglued in, of the following quantities and diameters:

• 14x 3mm
• 17x 4mm
•   1x 5mm

To print:

• Model optimised for 0.6mm nozzle diameter, but 0.4 should still work (untested).
• 0.2mm layer height

Specs:

• Width: 5.5cm
• Height: 8.2cm
• Depth: 0.5cm

Shield printed in Prusament Oh My Gold, and the inside details in GEEETECH Black.

Pearls I used were purchased from Amazon: https://www.amazon.co.uk/dp/B0822MN4FV