Ender 3 V-Slot Tool Holder - No Extra Screws Required

I originally designed and posted this on Thingiverse back in 2018.

Updated to v4!

• Now has little clip/guides for each hex key so they don't jangle around and hit one another.
• Also changed the scraper holder to a side insertion with raised collar to hold it there.
• Also changed the cutter holder to a side insertion WITH clip action! So the cutter will only go in and out when squeezed.
• Super awesome video here - https://youtu.be/WzJ0GfAAge4
  [2018-09-19]

I wanted a tool holder that
(a) keeps the tools away from the build volume
(b) holds only the tools that came with my Ender 3
(c) doesn't require any additional hardware (nuts, screws)
(d) doesn't require supports to print

This is what I came up with by remixing dinesh612 & Tomek2000 's great designs, hope you like it.

Note(1) - you'll need to temporarily remove the outermost screw at the top of the power supply holding 40x20 v-slot extrusion in order to install this. This is the secret to why you don't need additional hardware with this tool holder.

Note(2) - there's very little tolerance between the holder and the v-slot - you'll have to use a bit of pressure to get it to slide on.

Note(3) - what you see pictured is v1, I've since designed v2 to use less space/plastic/time to print.