April 17, 2025
Description
Have you tried turning your fridge off and on again? This Moss mini figure is perfect for fans of The IT Crowd! Available in two versions:
| Moss Mini Figure | Thick Version | Thin Version |
| Settings | 100% infill, 0.08mm layer, 0.16mm base | |
| Ironing | Enabled | |
| Default Print Size | 17x70x4.4mm | 25x100x1.68mm |
| Print Time | 29m | 28m |
| Filament Usage | 5.11g | 3.34g |
| Resizable Magnet Slot | Yes, 8x1.6mm | No |
| Filament Swaps | Five | |
| Fans | OFF (crack door/lid for enclosed printers or turn fans on) |
⚠ Important Hueforge Note: This print was created using my personal Hueforge settings, which turns all fans off. If your printer is enclosed, ensure proper ventilation or manually turn the fans back on to prevent overheating.
| Color (TD) | Thick Version | Thin Version |
|---|---|---|
| Ivory White (3.5) | Start | Start |
| Charcoal (0.6) | Layer #40 (3.28mm) | Layer #6 (0.56mm) |
| Cocoa Brown (1.4) | Layer #43 (3.52mm) | Layer #9 (0.8mm) |
| Red (4.0) | Layer #45 (3.68mm) | Layer #11 (0.96mm) |
| Lemon Yellow (3.6) | Layer #47 (3.84mm) | Layer #13 (1.12mm) |
| Charcoal (0.6) | Layer #51 (4.16mm) (rest) | Layer #17 (1.44mm) (rest) |
You can resize these figures, but do not change the Z-axis scale (height)—doing so will mess up the color layer transitions! Keep the Z-axis at 100% for the best results. The default print size for the thick version is a good lower limit for .4mm nozzles.
License:
Standard Digital File License
Keegs
