Photon - Picatinny Rail Mounted Stock

V.2 Files are now out! Fixed some issues like mounting problems in use with the RedCowl Venom Pro Stock Point and overall mounting part aesthetics overhauls as well as optimized print settings.

Introducing my latest creation, the Photon Stock! Photon is mounted via a picatinny rail stock mounting system, seen on blasters like Crush. Photon was designed from an ease of assembly standpoint, and as such, only uses easily acquirable M3 Hardware. Another one of my main goals going into this, was to make an aesthetically pleasing nice and balanced design, without compromising on build or functionality. 

PSA: Before reading further, please know that this stock is NOT designed for use with actual firearms! It will not hold up to the demanding durability required for them! I only recommend this to be used with foam dart blasters and airsoft, thank you for understanding!

Hardware list:

• 2x M3x15mm Bolt
• 2x M3x10mm Bolt
• 4x M3x35mm Bolt
• 6x M3 Hex Nut

Assembly Guide:  

Take the Stock body, place two M3 Hex Nuts into the cutouts in the back. Then, align the Stock pad with the Stock Body, then thread two M3x15mm through the holes from the Stock pad, securing the two together.

Grab your Extension, and place an M3 Hex Nut in the bottom. Then, slot it into the Stock Body facing up. Use an M3x35mm to secure the Extension to the Stock Body.

Place a second M3 Hex Nut into the extension, and take the Pic Rail Mount and slot it into the other side of the Extension, then use an M3x35mm to Secure the Pic Rail Mount to the Extension.

To attach the Cheekrest, align it along the top of the stock, with both mounting holes, then use two M3x10mm to fix the Cheekrest to both the Stock Body and the Extension.

Finally, to mount the stock to your rail, align the Pic Rail Mount to the rail, take the Pic Rail Bite Unit and connect it to the Pic Rail Mount. Once all aligned, Use two M3x35 and two M3 Hex Nuts to secure the stock to the rail.

Printing:  

For plate one, you are gonna want this orientation: 

• Stock Body 3-4 Walls 25% Cubic Infill
• Stock Pad 2-3 Walls 20-30% Cubic (TPU Optional)

 For plate two, you are gonna want this orientation:

• Extension 3-4 Walls 30% Cubic
• Pic Rail Bite Unit 4-5 Walls 45-99% Cubic (Or Equivalent)
• Pic Rail Mount 4-5 Walls 45-99% Cubic (Or Equivalent)
• Cheek Rest 2-3 Walls 25% Cubic (TPU Optional)

For plate two you also want manual painted normal supports in these places:

First,  the under side of the mounting point for the Pic Rail Mount.

Second, both slots in the back and front of the extension.

For extra questions, concerns or other things that you would need to contact me about, just shoot me a DM on discord at @randomstarwarsnerd

*Note: By downloading these files you confirm that you are not Derrikk Sun or part of Frontline Foam, you are in no way affiliated to Derrikk Sun or Frontline Foam, you are not downloading these files on behalf of Derrikk Sun or Frontline Foam, or an associate of Derrikk Sun or Frontline Foam. To the best of your knowledge, information and belief these files will not make it's way into the hands of Derrikk Sun or Frontline Foam.