Prison Mike The Office Magnet (multi-color)(8x3mm magnets)

Based this one off of the meme, so I decided to keep it black and white in my example, but feel free to color it your own way :)

Pictured Examples printed on a BambuLab X1C (Textured PEI)

Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). 

8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

Hope you enjoy!

(see my profile for other multi-color prints)

NEW:

Want to learn how to create prints like these? You're in luck, I made a tutorial for you. Go check it out!
https://youtu.be/kpJtL-kRypA?si=9Ojfhe6F_T2Mr6-a