OrganicFlaw Spikes

OrganicFlaw Spikes, a unique wall decoration that measures 50cm / 19.7in in both length and height. 
 

This piece was generated using the Fusion 360 API, and its design focuses on smooth transitions between elements to create an organic aesthetic.

Here are some printing and assembly notes to help you get the best results:

- To prevent warping, apply an adhesive such as spray or glue stick to the print bed.
- For optimal quality and faster printing, use the provided printing profile. It adjusts parameters like brim, seam, and infill.
- For my print, I used:
   - PLA Basic Ocean to Meadow (10902) and Pink Citrus (10903) from Bambulab for the cones
   - White PLA for the frame

Assembly Notes:

You can find a PDF with visual guide, here is a short version:
- Begin by assembling the frame. Connect the 'frame top left' and 'frame top right' pieces first.
- Next, connect the 'frame bottom left,' and complete the frame by connecting the 'frame bottom right'
- When placing the cones, refer to the following order:
 - The top right corner is designated as location 1-1 (column number - row number) and the bottom left corner is 9-9.
 - Make sure the number at the base of each cone faces you (or the bottom of the frame)
- Start by placing the cones in the outer rows (1 and 9) and columns (1 and 9), then work your way inward, finishing with piece 5-5 in the middle.