April 29, 2025
Description
Found this logo on Google images one day. Wanted to print it out so I made an STl out of it!
You will notice a little goof up on one of the R's and one of the I's. I tried my best to fix the mesh so it wouldn't happen but it was a bit above my skill level. It still prints really well and you can't notice it!
It is scaled to fit on the bed of my Prusa XL so you will need to scale it down. Keeping the entire z-depth at 10mm will produce a good looking sign, so scale accordingly!
Enjoy!
License:
Creative Commons — Attribution — Noncommercial
rtarbutton
