February 12, 2025
Description
Update 2025-02-12: Removed Tesla-promoting text from description.
If you're slightly annoyed that it's hard to stuff your Tesla's charging cable and adapters into their bag, then you need this liner. It holds the parts in place so you can get the bag zipped. It also has a big Tesla logo hidden away where nobody will see it.
The liner is printed in four parts to fit an i3 size printer. The parts are held together by M5 screws and nuts. It was designed to fit the Gen 2 Mobile Connector Bundle for North America, though it may also fit other regions' cable kits.
I modeled this in Fusion 360. I've included the model in .f3d and .STEP format.
Print in PLA. I used the Prusa 0.30mm DRAFT Generic PLA print settings. Set a color change at 1.4mm on each part. If you want Tesla's color scheme, print the bottom layers in white or grey and the top in red.
License:
Creative Commons — Attribution — Share Alike
6
kbob
