50A Receptacle Cover

Description

Large plate/cover designed to work with Leviton 50A EV Charging Receptacle in a larger 4.5" box. This cover is 5.25" wide, but you can adjust for yourself.

I used Polycarbonate filament as it has high temperature tolerance (over 120°C) and other receptacle plates are typically made of the same.

This design will be featured on Cheese MAKE by Roman Dmitri channel on YouTube: 

https://youtube.com/@cheese-make

Components

• Rear support bracket
  • Install this to the box first.
  • Works in vertical or horizontal orientation.
  • Use 2" machine screws with flat head.
• Front panel
  • Install second.
  • This hides bracket screws and holds plug in place.
  • Use ¾" machine screws.

Disclaimer

I am NOT a qualified electrician. This is a DIY project, and electrical work should be done with caution and proper knowledge of local codes.