Seeed Studio SenseCAP T1000 Charging Stand USB C PD Power

Was tired of carrying the charging cable for my SenseCAP T1000 and figured i can make a stand that i can keep at the office, bedside and what not. I also didnt like the cable only used usb 5v so this design makes it where you can use usb c pd power to charge it as well.

Its my first design so please be kind. I am not a designer just tinker.

It does require some light soldering but fairly straight forward.

I got the pogo connectors off AliExpress but you can also get them form amazon for faster delivery. the power board can be found for cheap from amazon as well. if you type usb c pd decoy.

Here is the link while it lasts:

USB C Decoy (Must Remember to change dipswitches to 5V!)

https://a.co/d/a5T6MSW

4 pin pogo connector (updated to the ones that have little screw holes)

https://a.co/d/0zplnO7

Will also need little screws that you can use to put the case together and for the pogo connectors:

https://a.co/d/0vNCyr2

Also remember the red mark is the positive and should face up like in the picture if there is no red mark.