HueForge - Red Dead Redemption 2 Cover Art

For this project I use a defunct brand of filament, so make sure you use a comparable filament for color and transmission distance to replace 3D Solutech filaments, if you're going off of exactly what filaments I used.

---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.39x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Elegoo Pro Black Transmission Distance: 1.8
PLA 3D Solutech Merlot Transmission Distance: 4
PLA Hatchbox True Red Transmission Distance: 8
PLA Polysonic Orange Transmission Distance: 5.6
PLA Elegoo Pro Yellow Transmission Distance: 9.6
PLA FilaCube Iced Coffee Transmission Distance: 9.6
PLA Elegoo Pro White Transmission Distance: 3.2

Swap Instructions:
Start with Pro Black
At layer #6 (0.56mm) swap to Merlot
At layer #8 (0.72mm) swap to True Red
At layer #13 (1.12mm) swap to Orange
At layer #16 (1.36mm) swap to Pro Yellow
At layer #21 (1.76mm) swap to Iced Coffee
At layer #23 (1.92mm) swap to Pro White for the rest.