Deburring Edge jig Cutter with side burr discharge (for wood and plastics/rubber material)

Dear Gentlemen, I took the great idea of Mr. Timo, thanks to share it, please have a look of his item https://www.thingiverse.com/thing:4318301 and I made a new design based on my needs, the parts are not interchangeable with his project, my jig is bigger but I used his idea for the cutter blade segment. The JLAB project is different since I added a side burr channel instead a burr box and an ergonomic handle, in addition I used no.:4 M3x20 screws to assebly the parts with a no:4 M3 insert instead of M3 bolt. Available for 0.5, 0.75, 1 mm chamfers. The burr channel seems works well :)!

I printed it with resolution 0.08, 40% of infill, the bottom part need support. Thanks again!

Regard

Jonweb

Print Settings

Printer Brand:

Creality

Printer:

**Supports:**

Yes

Resolution:

**Infill:**

40%

Filament: Aceaddity PLA Grey

Category: Hand Tools