April 14, 2025
Description
This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design, but is a new development except for the rear ball joint. The radar sensor and ESP board do not need to be soldered, as there is space for the connectors. The ESP board is snapped into the housing and can also be fastened with M2 screws if required. The radar sensor and Bluetooth antenna are inserted into the cover and secured with a piece of filament. The cover simply snaps into the housing when closed. The housing has ventilation openings at the top and bottom for heat transport. Standard USB-C plugs fit through the foot.
— I would be very happy if you have as much fun with the things as I do. —
If you like Buy Me a Coffee :-) Thank you very much!
Dieses kompakte Gehäuse ist für einen LD2450 Radarsensor mit Bluetooth-Antenne und einen ESP8266 Wemos D1 Mini V4 konstruiert. Es lehnt sich an F-Squares Multi Sensor-Entwurf an, ist aber bis auf das rückseitige Kugelgelenk eine Neuentwicklung. Radarsensor und ESP-Board müssen nicht verlötet werden, da Platz für die Stecker vorhanden ist. Das ESP-Board wird ins Gehäuse eingerastet und kann bei Bedarf auch mit M2 Schrauben befestigt werden. Radarsensor und Bluetooth-Antenne werden in den Deckel eingeschoben und mit einem Stück Filament gesichert. Der Deckel rastet beim Schließen einfach ins Gehäuse ein. Das Gehäuse hat oben und unten Lüftungsöffnungen für den Wärmetransport. Durch den Fuß passen handelsübliche USB-C-Stecker.
License:
Creative Commons — Attribution — Noncommercial — Share Alike