April 15, 2025
Description
Two Handed Hammer or Axe printed from 1.1 kg of filament, You will need a 1 meter long 2 cm diameter stick too.
Use 1% infill and 4 walls for the heads, you can use support if you want but the "Tinside" support was made smaller to compensate for the sagging if you dont use supports.
You have to print the handle part 5 times.
You will need a 1 meter long 2 cm diameter stick for the handle.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
NagyBig
