Netgear ORBI 753 wall bracket

I needed a decent wall mount for a Netgear Orbi so came up with this. Printed in Prusament Signal White PET-G it holds the router nicely and there is room at the back to feed the cables through the slot in the base.

Print Settings

• Filament: Prusament PET-G
• Printer: Prusa Mini+
• Layer Height 0.2mm
• Nozzle: 0.4mm
• Infill: 15% Adaptive Cubic
• Nozzle temperature: 240-250 Deg C
• Bed Temperature: 85-90 Deg C
• Perimeters: 4
• Layers: 8 Top and Bottom
• Seam positon: Aligned
• Extra perimeters if needed checked

I have hidden the Z seam in the 2 small grooves on the back of the print, since this will be against the wall in use, so any artefacts should be well hidden. If you are using your own slicer don't forget to add this!