Lens Caps (one part print) - 40.5 mm, 52 mm, 58 mm - Added support under springs

Changes:

• Added small supports under the springs, as with PETG I was getting spaghetti.
• Added x40.5 model with extra depth
• Added 58 model with normal depth

Available sizes:

• 40.5 mm + x40.5 mm with extra depth
• 52 mm + x52 mm with extra depth
• 58 mm + x58 mm with extra depth

Print the same as with Boopidoo's version (no support!!!).

Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.

Samsung and Fujifilm logo was added in OrcaSlicer.