January 30, 2022
Description
Very stable base for Black PSU, if you want to put PSU next to it, outside of the case.
Just print 2 of them and screw 2x20mm into the standard holes with an M3 screw.
----------------------------------------------------------------------------------------------------
Sehr stabiles Fuß für Black PSU, wenn man PSU einach daneben, außerhalb von Gehäuse stellen möchte.
Druckt einfach 2 von dem und schraubt mit M3 Schraube 2x20mm in die Standardbohrungen.
Print time: (with 0.6 Nozzle) - 2,5 hours
3D printing settings
0.3mm layer height
0.66mm layer width
2 - 3 perimeters - 30% infill
Print speed: 35mm/sec
License:
Creative Commons — Attribution — Noncommercial
7
eds_3d_shop
