April 20, 2025
Description
Will need some sort of washer+nut&bolt, or washer+spring, inserting into the back - can get some from online stores - 12mm OD required
99% sure the threads are M16*1.25, thats what I've modelled them to and seems ok if not a bit tight.
Used a thread-gauge tool + digital calipers for measuring
Printed on an Ender3v2 on fast settings, with wet PETG @ 0.2LH. Could definitely get a nicer finish on a nicer machine with proper tuning
I put a K for Klein on the top, ill put a version without it in downloads also.
License:
Creative Commons — Attribution — Noncommercial
9
Printy
