This is a remix of the portrait adapter by OGK that allows you to clamp your phone vertically with the BSP-D6/D7, but I've modified it to work with BSP-D8/D9 instead. I've also made the hook part to be a detachable component, allowing users to make their own custom hooks for other brands of controllers.
Specifications:
- Supported device width - minimum 75mm for BSP D8/D9
- Supported device thickness - maximum 12mm
- Can be compatible with other brands/models of controllers - just measure the thickness of the extension bridge and make a hook that fits it
- Only compatible with Bluetooth controllers - for Type-C controllers, a gap is needed on one of the clamps to access the port, but I don't own one to be able to check fitment
Print notes:
- Tested with PLA
- Supports needed? - Yes, for clampLeft.stl and clampRight.stl, in the cutout area where the hooks will be inserted, I used 2.2mm pillars with 75° threshold
kencyf
