Toggle clamp quick set Remix

Hi,

this is a remix of (Lo²)² model Toggle clamp quick set hold down changed to fit GH-201-B toggle clamps. Since I didn't had a wing nut I used some knobs from one of my other designs.

my print settings:

- filament = Prusament PETG orange
- 0,2 mm layer height @ 0,4 nozzle
- 4 perimeters
- 25% gyroid infill
- solid layer: 3 top & bot
- supports: yes
 

used parts:

• 1x toggle clamp GH-201-B
• 2x knobs
• 1x foot with a self-adhesive pad
• 1x M6 x 120 mm threaded rod
• 1x M6 x 15 mm bolt, hex head
• 4x nuts M6
• 1x M6 washer

Note:
The knobs and the foot in the design are for M8 bolts and nuts. If you want to use it you have to sclae it down in the slicer to M6. The holder doesn't need to be scaled.

Happy Printing!