Chiana from Farscape Hueforge

This is a Hueforge of Chiana from Farscape (the best show ever). The model is 165mm x 135.20mm x 2.08mm so it will fit on a small printer. AMS is not needed, just add pauses at the indicated heights below to switch colors. If you scale up the print, only scale in X and Y axes.

Print Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA+ IIID Max Teal Transmission Distance: 4.2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Teal
At layer #17 (1.44mm) swap to Jade White for the rest.

I have a Limited Commercial License for Hueforge.