DAFFODIL Decor

DAFFODIL Decor

Carefully remove the supports using clippers. One by one, in order. Start from the very top and with the thinnest ones. Take your time. Do not pull them off forcefully to avoid damaging the model.

Printed with fuzzy skin effect.

Fuzzy Skin: All Walls
Fuzzy Skin Point Distance: 0.35
Fuzzy Skin thickness: 0.2

If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo

All my photos are real and show an actual 3D-printed figure photographed by me.

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.