Caster Adapter for Metal Bakers Rack

Awhile back I bought a set of casters in hopes to fit my bakers rack. I did not test fit the casters when they arrived (or within the return period) as I was unable to fully access the rack. When I finally got around to this..I found the casters I ordered would not fit the threads on the legs of the bakers rack. I then decided to design and print a set of adapters that would allow me to use the casters I purchased. So far I am quite happy with the results and I will upload more pictures once I get the last caster mounted to the final adapter that just finished printing. I decided to use a couple drops of hot glue to secure these in place even though there is a good interference fit already. The adapters fit 3/4" (19mm) round tubes which is about the standard size although I do see one of my other racks is 1" (25mm)

For this Bakers Rack and other racks with 19mm (3/4") tubes.. https://www.amazon.com/gp/product/B0014QS1XC

Casters I used are here.. https://www.amazon.com/gp/product/B01LWO1P2F

I will upload a 25mm size in the near future and if you need any other sizes please feel free to post up a request. I am also including the sketchup files for those wanting to mod the design themselves. Cheers!

Print Settings

Printer Brand:

FlashForge

Printer:

**Rafts:**

No

Supports:

**Resolution:**

200

Infill:

**Filament:** Hatchbox ABS

Category: Kitchen & Dining