The last Shifter mod you'll ever need... - Remixed Logitech G29 G920

>>>Newer Altered Version Available<<<

I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days.

I modified the slider for increased durability and smoother movement, and I remixed the top plate for added stiffness.
(With PLA+, it feels very stiff at first, but this will decrease slightly after a few hours and will probably break after a few weeks)

I also added smaller sequential shafts for 8mm springs.
(Use a washer plate for the body to prevent slipping.)

The top plate can be used without slider and bottom part but it's less stiff

Sliders can also be used with Original model by Knowpistons

My Print Settings

Slider

• 100% Infill
• 2 Walls
• 0.2mm layer height

Top plate

• 25% Infill Gyroid
• 6+ walls (or the mounts will break when using sequential shifting)
• 0.2mm layer height
• Organic support

Others

• 25% Infill Gyroid
• 4 Walls
• 0.2mm layer height

Update:

• top_v43 with slightly smaller guides to prevent breakage during harsher shifting reworked
• slider_v42 reworked
• alternative sliders added