13mm Reversible Ratchet Wrench

This one has not been tested yet but is using the same design as the 14mm which has been tested.

I made this 13.4mm inside.

Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489

More sizes to come. I originally made 8mm and 10mm but was asked to design some sizes up to 14mm ;D

Utilizing print in place one-way bearings. No support needed.

If you have any issues printing please let me know, feedback is key to better designs ;)

If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US

Thanks for stopping by, come back soon ;)

Category: Engineering