Starling Dish - Harbor Freight Flag Pole - Accessory Kit.

Collection of prints to mount Starlink Dish onto a HF flag pole, mount to corner of deck, and pole fall retention rings.

All printed in PETG. 

Retention Rings -  Uses 4mm x 14mm or 16mm screws and Nylon lock nuts.  Printed in PETG with .20mm layer height, 6 walls, and 25% Gyroid infill.   Could also print in ASA or ABS or any outdoor rated filament.  Don't use PLA.  

Corner Deck Flagpole Mounts - Uses M6x40 bolts and nuts.   Printed in PETG with .20mm layer height, 8 walls, and 30% Gyroid infill.   Attached to the deck 2x6 with deck screws and used a countersink bit to taper the hold for deck screw head.

Top Flagpole Dish Mount Adapter - Printed in PETG with .20mm layer height and 100% infill.