CleanAce Air Purifier Bracket for Toyota Sera (EXY10)

I made this bracket as my Sera did not come with a Clean Ace air purifier, and a bracket was impossible to find. Uses McMasterCarr - M3.5 x 6mm Self-Tapping Screws90380A361 attaching the air purifier to the mount.

Only tested with period-correct CleanAce as pictured- unknown compatibility with newer CleanAce's.

Printing Instructions

• Material: ASA (required for heat tolerance in the cabin- PETG will NOT work.)
• Walls: 6 walls
• Infill: 100%
• Print on the longest length flat on the bed. Adhesive is recommended to keep the print from warping up, as well as an enclosed chamber. However, very slight warping (<2mm) is okay.

Provided as-is. No warranty expressed or implied.