Corner Radius Gauges with Box and Parametric Fusion360 Script

What is this?

This is a Fusion360 Script which creates Corner Radius Gauges and a Box for the gauges.

You will be able to set the the amount of gauges, if you want a box for them, if you want outer or inner radiuses or both. 

Info

This script can take a while, depending on your choice for the radius start and end parameters. So for testing purposes try to choose a lower end radius first. 

I would use 0mm as start and 5mm as end radius to  see what the script will create for you.

I've added a description to every setting and I hope the description will help you with filling in the parameters ;-)

Print files

I've added some  printable files. You need 6x3 magnets  for the box (8 of  them).

https://www.amazon.de/dp/B08F745KY5

ATTENTION

This script is in BETA stadium, which means there will be edge cases which I didn't manage to test and which will raise errors or which will cause fusion to not create the bodies properly.

If you find such an error please write a comment with your settings you used in the script and I'll try to fix this.

How  to  install

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-install-an-ADD-IN-and-Script-in-Fusion-360.html