Nozzle Wrench (for longer bits)

Having printed Manuel's original wrench, I found the 7mm socket bit I had in my Makita toolset was a bit loose and protruded further than I'd like. 

This remix is a minor change to increased the depth of the bit holder hole to 20mm from the original 10mm to better fit longer bits.

Example Print (gcode provided):

• Material: Prusament Orange PETG
• Print Settings (PrusaSlicer): 0.20mm Quality, 25% infill (Gyroid)
• Generic box used to apply fuzzy skin just to the outer band of the handle
• Fuzzy Skin: Outside walls, 0.3mm point distance, 0.3mm thickness