Go-Kart - 1:10 Scale

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY!

THE GO-KART is a fun-size 1:10 scale display model inspired by modern day go-karts.

SIZE / WEIGHT:

• Total assembly: Roughly 18 x 12 cm

• Filament: We used roughly 75 g of filament using 5% infill. This can be reduced when using lightning infill. 

MAKEABLE FOR EVERYONE:

• Largest single part: 94 x 151 x 31 mm

• Minimal supports: No supports should be needed to print this model

• Connectors: Besides glue-joints this model also features snap connectors

• Includes tips & tricks

FEATURES:

• Rotating wheels

• Working steering mechanism

• Detailed engine

• Assisted assembly with connectors and guide-pins

• Also includes a VARIOSHORE-TPU DISCOUNT

RECOMMENDED SETTINGS:

• Resolution: 0.2 mm layerheight

• Infill: 5%, or lightning infill

• Supports: Yes, we recommend using organic supports!

• Brim: Advised against warping, not mandatory!

NOTES:

• Assembly: The model contains an assembly guide, please follow this guide with care. 

• Fitment: Fit check any parts before permanently attaching them! Some parts may need sanding or filing!

SUPPORT:

Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]

Feel free to share your makes with us on Instagram and tag us using @stllabs

(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)