December 17, 2025
Description
This bracket allows you to use an 80mm fan where you would normally use a 70mm one.
My use case was to make a CPU cooler much quieter but there are plenty of other uses.
You'll need 8 screws; 4 to mount the bracket and 4 to mount the fan to the bracket.
Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
repairwins
