Cuisinart 14-cup Food Processor Organizer [Modular Version]

A remix of @Colin_40440's and calebfwood's 4-blade storage case with a dedicated dough blade and stem storage component, and a (new) dovetail connection to assemble with the original model. I've included the same dovetail geometry separately as their own meshes, to facilitate additions by others. 

Note: this model was designed based on the 7-cup (DLC-10) stem and dough blade, I THINK the 14 cup models are similar enough to work, and based on Cuisinart's website, disk-blade holders should work for most classic model disk blades, but YMMV. 

The tolerances currently work well on my own printer, leave a note if they don't work on yours and I will try to update the model accordingly. 

Note for further remixes:

The dovetail surfaces are not parallel - there is a draft introduced on the male component, which tightens the joint as it is pushed together. The dovetail angle from vertical is 34.3 degrees.

StemAndDoughBladeCase - This is the new model with storage for the blade stem and Dough blade

CuisinartBladeCaseWithDovetail - This is the original model from calebfwood and is the suggested companion print to the new stem and dough blade case. 

BladeCaseStemOrganizerAndDovetail - Legacy component from @Colin_40440, which includes the dovetail but also ends up doubling the stem storage. (included here in order to give them proper credit for the idea)

DovetailForCuisinartBladeCase - Isolated male dovetail geometry

FemaleDovetail - Isolated female dovetail geometry (dovetail angle from vertical is 34.3 degrees)