Z-axis for TwoTrees TTS-10 laser engraver height adjustment

Manual Z-axis for focusing Two Trees TTS-10 laser engraver, replacing original height adjustment mechanism.

Laser mounting plate with multiple offsets, for different laser builds. Mounts to laser module with 4 M3x12 screws.

Rails/baseplate mounts with 4x M3x12 mm screws onto the original laser carriage. I tapped the holes for M3, they're printed at 2.5 mm (M3 drill size). I also used some hot glue.

Assembly also requires 4x M3x20 mm screws and 4x M3 nuts.

You'll need two z endplate copies.

Printed mine on PETG with 0.2 mm layers, 20% infill, 3 walls, 3 floors and tops.