Fox DHX2/Float X2 (803-01-545) Vise clamp

This vise clamp is designed with a diameter of 1.315", or just about perfect to hold the rezi for service. If you need this you know what it is, so I wont explain too much. There's a slot for a 12x2mm magnet if you wish to add one.

Print it with the text facing down, no supports needed. 3 walls minimum and the higher the infill, the longer the tool will last and the better it will be (you can clamp harder). I did mine with 100% infill in PLA

The part number from fox would be 803-01-545. Certain models of shocks require different diameter, I can add custom sizes if you leave a comment