Headphone Holder

Layer Height:

Layer Height: 0.2 mm

Initial Layer Height: 0.2 mm

Walls:

Wall Line Count: 2

Wall Thickness: 0.8 mm

Top/Bottom:

Top Layers: 5

Bottom Layers: 5

Top/Bottom Thickness: 0.8 mm

Infill:

Infill Density: 20%

Infill Pattern: Grid (or your preference)

Material (PLA):

Printing Temperature: 200°C

Build Plate Temperature: 60°C

Enable Retraction: Yes

Speed:

Print Speed: 50 mm/s

Travel Speed: 120 mm/s

Travel:

Combing Mode: Within Infill

Z Hop When Retracted: Enabled (optional)

Cooling:

Enable Print Cooling: Yes

Fan Speed: 100%

Support:

Generate Support: Yes

Support Structure: Tree

Support Placement: Touching Buildplate

Support Overhang Angle: 50°

Support Density: 15%

Support Z Distance: 0.2 mm

Build Plate Adhesion:

Adhesion Type: Brim (optional, for better first layer adhesion)

Ironing (for smoother top surfaces):

Enable Ironing: Yes

Iron Only Highest Layer: Yes

Ironing Pattern: Zig Zag

Ironing Flow: 10%

Ironing Speed: 30 mm/s