Workmate Adapter Tabletop

Please read to the very end - an dont forget to leave a like !

These inserts are made to adapt machines without an machine base to a workmate workbench, which are really helpful devices.

I use a wooden plate where underneath 4 round adapters are applied which fit into the holes of a workmate workbench. The grey adapters are fixed from underneath to the wooden tabletop. I used woodscrews but i would recommend metal screws and nuts with through holes in the wooden plate.

Just fit the tabletop into the for holes and screw the machine on. The machine is fixed from above with screws - again metal screws and nuts are recommend.

Screw it down with the workbench clamping system until the system fits tight an the table does not move anymore on the workbench.

The model is printed in PLA with a wall thickness of 5 and an infill of 30 % 

If it is often used I would recommend a stronger material but this was the only thing i have currently.

Please not that what works for me does not necessarrily work for you - so the use is at your own risk.

If you this model is helpful please leave a like.

This model is only for non commercial, private use.