This is a pedestial for an Unifi 7 Lite AP. You can use none or more of part F (=15 cm) to get the AP to your desired height.
All parts except part B can be printing without supports.
Assembling:
- Insert ethernet cable into the socket of the AP.
- Insert part D (twist-lock) into part A.
- Put the ethernet cable into the lead-through of part A, put part A onto the AP and twist it into the lock position.
- Feed the cable through part B and screw it onto part A.
- Feed the cable through Part F onto part B. Repeat this as often as you want for increased height.
- Feed the cable though part G and screw it onto part F (or part B if you don't have any part F).
- Feed the cable through the lead-through at the bottom and plug it into your PoE switch.
Hoopy
