Lathe 3-Jaw Chuck Spider / Stop - set of 6

A set of lathe spiders for lathe chucks with jaws up to 20mm wide.  The chuck I made these for is a 160mm.

I created a parametric model in Fusion so any depth or jaw width can be added if requested.

Alternatively changes in depth can be altered by adjusting Z in the slicer.

The photos show the 5mm version in the chuck.

I have just added a 13mm since I needed one myself.

I also have a 4-jaw version modelled:  https://www.printables.com/model/1287836-lathe-4-jaw-chuck-spider-stop-set-of-5

I have also introduced a Version 2 of the 3-Jaw which will allow a smaller minimum diameter workpiece - reduced from 20mm to 12mm.

https://www.printables.com/model/1466183-lathe-3-jaw-chuck-spider-stop-version-2

I printed in 3DQF PLA+