December 10, 2025
Description
Small bracket that screws onto the 40mm fan to hold an endoscope at the correct focal distance to the nozzle.
Print information
PETG or better recommended PLA will fail with time
no supports needed
make sure you have good layer adhesion so that the grub screw won't split the print
Required hardware
M3x14mm BHCS (for 4010)
M4x4mm grub screw
but any longer M4 screw will work if you don't have a fitting grub screw
Submit feature requests here!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
clogged_nozzl3
