Bambu AMS Lite Drybox (set)

Made these mountable dryboxes for the AMS Lite.
I designed them to be small and fit each position on the AMS
One for each spool position with a cross bar connector to stabilize the boxes

Updated (5/23/25)
Updated Drybox lid to allow for Desiccant Holder
Added Dessicant holder (Snaps into the Drybox Cover V2)
Updated with a revised fillament guide ball to reduce drag resistance

Updated (5/27/25)
Fixed the dragging issue by changing the filament ball to allow a short PTFE tube in the center.
Fillament ball V3

I have included the Bambu 3mf file (I printed this on a Bambu A1)

Almost fully printed. Uses hydro meters (One for each drybox)
https://www.amazon.com/dp/B0CXHS6CYS?ref=ppx_yo2ov_dt_b_fed_asin_title

Largly assembled using 3mm screws
https://www.amazon.com/dp/B09WVHV6SD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 \
Print List

4 x Base Drybox - Each is for the AMS Lite specific position
4x Drybox Covers
4 x Drybox Cover Knob
4 x Filament Guide Ball Outer
4 x Filament Guide Ball
4 x Hygrometer Mount
4 x Window Mount
4 x Cross Bar Hook
1 x Cross Bar lock 1-4
1 x Cross Bar lock 2-3

Also included a mini filament spool adaptor as I use a lot of generic PETG

Window part is just a clear plastic sheet I cut up on a table saw (4x)

Notes.
Printed everything with .04 standard strength (PETG) and TPU fpr the seals
Printed the Filament Ball parts with .08mm Extra Fine.