May 7, 2025
Description
The model in this project is a simple mount / hanger / hook for a lantern.
The mount can be placed anywhere with just two screws.
The pictures shows an example of outdoor use.
Screws
Two screws are needed.
The holes measures 4 mm in diameter.
The depth of the holes measures 5 mm.
Lantern clearance
Any lantern with a handle thickness of 3 mm or below will work with this lantern.
Got a bigger handle on your lantern? I have provided the Fusion file if you should need any adjustments.
Print settings:
These are the specific settings i used.
Orientation: The mount should be printet on its side to get maximum strength.
Support: Tree, supporting the mount. Not needed in the holes.
Feel free to post makes, leave a like, a comment or any questions you might have :D
License:
Creative Commons — Attribution — Share Alike
Christian K
