May 7, 2025
Description
The Atomstack P1 laser engraver has a ventilation outlet of around 50mm, while most air filters (like the Atomstack D2) need some 75mm tube. This adapter allows to easily attach these to the Atomstack P1.
The 75 mm tube gets fixed using a hose clamp, while on the laser side, you need to put a layer of duct tape on the inside of the adapter to seal everything up tightly, while still allowing to detach the adapter.
Based on the parametric duct reducer from @GizmoGoody.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
jbtronics
